U Manley Mini Massive

The Mini Massive is the little brother to Manley's Massive Passive EQ. This new EQ is based on the same passive EQ sections as the Massive Passive's Low Band and High Band and shares most of the same components and circuit layout. The Mini Massive is smaller at only 1U high and about half the price and includes some new features, refinements and a new level of clarity fit for mastering at its best.

SPECIFICATIONS

• Number of Channels: 2 solid state makeup gain

• Number of EQ selections: Total 96 (48 per channel)

• Low Shelf/Low Bell: 11 positions (22 Hz -1 kHz)

• High Shelf/High Bell 11 positions (560 Hz - 27 kHz)

• High Bell2 4 positions (8.2 kHz - 27 kHz)

• Bypass Method: True Hardwire Bypass via relays

• Maximum Input for 1% THD Balanced +26 dBm; Unbalanced -10 dBv +12 dBm

• Maximum Output (50 to 20kHz): Balanced +4: +30 dBm; Unbalanced +4: +24 dBm; Unbalanced -10: +18 dBm

• THD & Noise (1kHz @ +4 dBm): 0.007% (noise dominated)

• Frequency Response: 5 Hz to 90 kHz (±0.5 dB transformers bypassed; +0.5 /-3 dB via transformers)

• Noise Floor: -78 dB (ref to +4 dBm)

• Signal to Noise Ratio: 108 dB typical (ref to +30 dBm)

• Input Impedance: 20 kOhms

• Output Impedance: 60 Ohms direct; 300 Ohms via transformers

• Power consumption: 15 Watts

• Operating mains voltage: Units' power transformers are wired for original destination country's mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. Power transformer must be rewired on the pcb in order to change mains operating voltage. Fuse must be changed to appropriate value.

• Mains Voltage Frequency:

• Fuse Values S/N up to LMINI151: @ 100 - 120V operation: 1A; @ 220 - 240V operation: 500mA

• Fuse Values S/N after LMINI151: @ 100 - 120V operation: 400mA; @ 220 - 240V operation: 200mA

• Fuse Size: 5mm x 20mm SLO-BLO (time delay) type (BUSSMAN GDC Series)

• Size (1U): 19" x 1.75" x 10"

• Weight: Unit 12 lbs. Shipping Weight: 16 lbs.